Channel Menu - Samsung LE37C670 User Manual

Basic Features

Channel Menu

Retuning channels
¦
Antenna (Air / Cable / Satellite)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Country
The PIN input screen appears. Enter your 4 digit PIN number.
: Change the country for digital
Digital Channel
■
channels.
Analogue Channel : Change the country for analogue
■
channels.
Auto Store
Scans for a channel automatically and stores in the TV.
✎
Automatically allocated programme numbers may not
correspond to actual or desired programme numbers. If
a channel is locked using the Child Lock function, the
PIN input window appears.
When Antenna Source is set to Air or Cable:
Antenna Source (Air / Cable / Satellite )
■
antenna source to memorise.
Channel Source (Digital & Analogue / Digital /
■
Analogue): Select the channel source to memorise.
When selecting Cable → Digital & Analogue or Digital:
Provide a value to scan for cable channels.
Search Mode (Full / Network / Quick): Scans for all
channels with active broadcast stations and stores them
in the TV.
✎
If you set Quick, you can set up Network,
Network ID, Frequency, Modulation, Symbol
Rate manually by press the button on the remote
control.
Network (Auto / Manual): Selects the Network ID
setting mode among Auto or Manual.
Network ID: When Network is Manual, you can set up
Network ID using the numeric buttons.
Frequency: Displays the frequency for the channel.
(differs in each country)
Modulation: Displays available modulation values.
Symbol Rate: Displays available symbol rates.
12
English
When Antenna Source is set to Satellite:
Channel Type (All / TV / Radio):
■
type to memorise.
Satellite (All / Astra 19.2E):
■
Scan Mode (All Channels / Free Channels Only):
■
Selects the scanning mode of the selected satellite.
Manual Store
Scans for a channel manually and stores in the TV.
✎
If a channel is locked using the
the PIN input window appears.
When Antenna Source is set to Air or Cable:
Digital Channel
■
are updated in the channel list.
✎
When selecting
Bandwidth.
✎
When selecting
Modulation, Symbol Rate.
Analogue Channel (Programme, Colour System,
■
Sound System, Channel, Search, Store): If there
is abnormal sound or no sound, reselect the sound
standard required.
✎
Channel mode
x
: Select the
x
When Antenna Source is set to Satellite:
Satellite
■
buttons.
Transponder
■
down buttons.
Scan
■
Selects either free or all channels to store.
Network Search (Disable / Enable
■
network search using the up/down buttons.
Signal
■
broadcasting signal.
✎
Information on a satellite and its transponder is subject
to change depending on the broadcasting conditions.
✎
When
the ENTERE button. Channel scan is started.
: When scanning has finished, channels
Antenna Ž Air: Channel, Frequency,
Antenna Ž Cable: Frequency,
(programme mode): When tuning is complete,
P
the broadcasting stations in your area have been
assigned to position numbers from P0 to P99. You
can select a channel by entering the position number
in this mode.
(aerial channel mode) / S (cable channel mode):
C
These two modes allow you to select a channel
by entering the assigned number for each aerial
broadcasting station or cable channel.
: Selects the satellite using the up/down
: Selects the transponder using the up/
Mode (All Channels / Free Channels Only):
Quality: Display the current status of
setting is completed, move to Search and press
Select the Channel
Selects the satellite to scan.
Child Lock function,
): Enable / Disable