Computer Stops Operating During Scanning - Canon MG3500 series Online Manual

Computer Stops Operating during Scanning

Check 1: Restart the computer, reduce the output resolution
and scan again.
Resolution
Check 2: Delete unnecessary files to obtain sufficient free hard
disk space, then scan again.
Error message may appear if there is not enough hard disk space to scan and save, when
the image size is too large (such as when scanning a large item at high resolution).
Check 3: In Folder to Save Temporary Files of IJ Scan Utility,
specify a folder on a drive with sufficient free space.
Settings (General Settings) Dialog
Check 4: Multiple devices may be connected to USB ports.
Disconnect devices other than your scanner or printer.
62