Connecting To A Tv(Video) - Samsung BD-P1400 User Manual

CONNECTING TO A TV(VIDEO)

1. Using video/audio cables, connect the VIDEO (yellow) / AUDIO (red and white) OUT terminals on the rear of
the Blu-ray Disc Player to the VIDEO (yellow) / AUDIO (red and white) IN terminals of your TV.
2. Turn on the Blu-ray Disc Player and TV.
3. Press the input selector on your TV remote control until the Video signal from the Blu-ray Disc Player appears on
the TV screen.
•
If you have set the remote control to properly operate with your TV (see pages 18~19), press the TV INPUT
SEL. button on the remote control and select VIDEO as the external source of the TV.
M

Noise may be generated if the audio cable placed too close to the power cable.

If you want to connect to an Amplifi er, please refer to the Amplifi er connection pages. (See pages 26~29)

The number and position of terminals may vary depending on your TV set. Please refer to the user's manual of
your TV.

If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the Blu-ray
Disc Player.

The VIDEO source is always output in 576i/480i resolution regardless of the set resolution in the SETUP menu.
(See page 40)
Yellow Red White
English _25