Connecting An Hdtv - Separate Video/Audio Connections; Cable In; Dvi; Component Video (Ypbpr) - Motorola DCX3520e-M User Manual

Connecting Your DCX Set-top
Note: Only one HDTV video connection needs to be made to an HDTV.
Note: Solid lines indicate optimum connections.
Note: Optional HDMI connection to A/V Receiver shown but not required.
Connecting an HDTV — Separate Video/Audio Connections

Cable In

Connect an RF coaxial cable to the cable wall outlet and the CABLE IN connector on the
DCX set-top.

DVI

If your TV has a DVI input, use the DVI connection for your video, connect a HDMI-to-DVI
adapter or cable to the HDMI out connector on the DCX set-top and the DVI-HDTV
connector on your TV.
Note: A DVI connection supports only the video connection between the DCX set-top
and the HDTV.
To connect your audio connections with your TV speakers, go to the
below.
To connect your audio connections for an A/V receiver, go to
— Audio.

Component Video (YPbPr)

Connect the component video cables to the Y, Pb, and Pr connectors on your HDTV and
DCX set-top.
Note: This connection supports only the high definition video connection between the
DCX set-top and the HDTV.
Note: Be sure to match up each signal to the same connection on the TV, otherwise the
colors will not appear correctly on your TV.
To connect your audio connections with your TV speakers, go to the
To connect your audio connections for an A/V receiver, go to
— Audio.
High-Definition All-Digital Dual Tuner DVR Set-top DCX3520e-M • User Guide
365-095-22821-x.1
061713
B
Audio section
Connecting an A/V Receiver
Audio section.
Connecting an A/V Receiver
11