Canon MX530 series Online Manual page 939

1304
Cause
Paper is jammed when performing automatic duplex printing.
Action
If the paper is jammed when performing automatic duplex printing, remove the paper following the
procedure below.
Watch the movie (Windows)
Watch the movie (Mac)
Important
• The power cannot be turned off while the machine is sending or receiving a fax, or when the received
fax or the unsent fax are stored in the machine's memory.
Make sure if the machine completed sending or receiving all the faxes before disconnecting the
power cord.
If you unplug the power cord, all the faxes stored in the machine's memory are deleted.
Note
• If you need to turn off the machine to remove jammed paper during printing, press the Stop button to
cancel print jobs before turning off the machine.
1. Pull the paper out slowly from the paper output slot.
Hold the paper with your hands, then pull the paper out slowly not to tear it.
Important
• Do not pull the paper out from the front tray even though you can see the jammed paper at the
front tray. Pulling the paper out forcibly from the front tray may damage the machine.
2. Reload the paper, and press the machine's OK button.
If you were not able to remove the paper out in step 1:
Follow the procedure below to remove the paper from the transport unit.
3. Turn the machine off, then unplug the power cord.
939