Download  Print this page

Setting Up Anynet; Scanning And Switching Between Anynet+ Devices - Samsung PS42A450 User Manual

Hide thumbs
   

Advertisement

Setting Up Anynet +

The following settings are to use Anynet + functions.
Using the Anynet + Function
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Input, then press the
ENTER button.
Press the ▲ or ▼ button to select Anynet + (HDMI-CEC), then

press the ENTER button.

Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
Press the ▲ or ▼ button to select Anynet + (HDMI-CEC), then
4
press the ENTER button.
5
Press the ▲ or ▼ button to select On, then press the ENTER
button.
The Anynet + (HDMI-CEC) function is enabled.
If you select Off, Anynet + (HDMI-CEC) is disabled.
When the Anynet + (HDMI-CEC) function is disabled, all the
Anynet + related operations are deactivated.
Turning an Anynet + Device Off Automatically when the TV is Turned Off
4
Press the ▲ or ▼ button to select Auto Turn Off, then press
the ENTER button.
5
Press the ▲ or ▼ button to select Yes, then press the
ENTER button.
The Auto Turn Off function is enabled.
If you select No, the Auto Turn Off function is canceled.
Press the EXIT button to exit.
The Select Device setting of the TV remote control is to be set
to TV to use the Anynet + function.
If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned
off. However, if the device is recording, it may not be turned off.
Scanning and Switching between Anynet + Devices
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Input, then press the
ENTER button.
Press the ▲ or ▼ button to select Anynet + (HDMI-CEC), then

press the ENTER button.

Press the ▲ or ▼ button to select Select Device, then press
the ENTER button.
4
Press the ▲ or ▼ button to select to a particular device and
press the ENTER button.
It is switched to the selected device.
5
If you cannot find a device you want, press the ▲ or ▼ button
to select Searching Connections, then press the ENTER
button.
The meassage Configuring Anynet + connection... is
displayed. When searching devices completes, the connected
devices are listed in the Anynet + menu.
Switching to the selected devices may take up to 2 minutes.
You cannot cancel the operation during the switching
operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of found devices is not displayed.
Although the TV automatically scans devices when it is turned on using the POWER button, devices
connected when the TV is on or under a specific circumstance are not displayed in the device list.
Therefore select Searching Connections menu to search devices.
If you have selected external input mode by pressing the SOURCE button, you cannot use the
Anynet + function. Make sure to switch to an Anynet + device by using the TOOLS button.
English - 1
TV
P 1
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver
:Off
Setup
Move
Enter
Return
Setup
Anynet + (HDMI-CEC)
: Off
Auto Turn Off
: Off
Searching Connections
Move
Enter
Setup
Anynet + (HDMI-CEC)
: On
Auto Turn Off
:
Searching Connections
Move
Enter
TV
P 1
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver
:Off
Setup
Move
Enter
Return
Setup
Anynet + (HDMI-CEC)
:
Auto Turn Off
:
Searching Connections
Move
Enter
Off
On
Return
: Off
No
Yes
Return
DVDR1
DVDR
DVD1
DVD
On
Yes
Return
Continued...

Advertisement

Table of Contents

   Also See for Samsung PS42A450

This manual is also suitable for:

Ps42a451Ps50a450Ps50a451

Comments to this Manuals

Symbols: 0
Latest comments: