Heat Grip" (Optional); Mtc/Abs - KTM 1190 ADVENTURE Owner's Manual

7 COMBINATION INSTRUMENT
7.9.9

"Heat Grip" (optional)

7.9.10

"MTC/ABS"

–
Press the UP or DOWN button until the "Heat Grip" menu appears on the matrix display.
Pressing the SET button opens the menu.
–
Use the UP or DOWN button to navigate through the menu. Use the SET button to select
a heating level or to switch off the heated grips.
401838-01
Condition
• The vehicle is stationary.
–
Press theUP or DOWN button until the "MTC"/"ABS" menu appears on the matrix display.
In the "MTC/ABS" menu, "MTC" and "ABS" can be switched off.
In "ABS mode", a choice can be made between "Road" and "Offroad".
Info
After the ignition is switched on, motorcycle traction control and ABS are enabled
again.
When the "Offroad" ABS mode is enabled, ABS only controls the front wheel. The
L01436-10
rear wheel is not controlled by ABS and may block during braking maneuvers.
When the "Road" ABS mode is enabled, the brakes are also applied to the rear wheel
when the front brake is activated. ABS can intervene on both wheels.
60