Download  Print this page

Picture Options - Samsung PS42A426 User Manual

Hide thumbs

Advertisement

Table of Contents
 Flesh Tone:-15~+15
You can emphasize the pink tone in the picture.
Press the ◄ or ► button until you reach the optimal setting.
Changing the adjustment value will refresh the adjusted screen.
 Edge Enhancement: Off/On
You can emphasize object boundaries.

Picture Options

You can set detailed picture settings.
1
Press the MENU button to display the menu.

Press the ENTER button to select Picture.

Press the ▲ or ▼ button to select Picture Options, then
press the ENTER button.
4
Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
5
When you are satisfied with your setting, press the
ENTER button.

Press the EXIT button to exit.
In PC mode, you can only make changes to the Colour
Tone, Size and Screen Burn Protection from among the
items in Picture Options.
 Colour Tone: Cool/Cool1/Normal/Warm1/Warm
When the picture mode is set to Dynamic or
Standard, Warm1 and Warm cannot be selected.
 Size: Auto Wide/1:/Wide Zoom/Zoom/4:/Just Scan
You can select the picture size which best corresponds to
your viewing requirements.
− Auto Wide: Expanding and pulling up the picture from
4:3 to 16:9 ratio.
Auto Wide function is available only in TV, Ext.1, Ext.2,
AV and S-Video mode.
− 1:: Sets the picture to 16:9 wide mode.
− Wide Zoom: Magnify the size of the picture more than 4:3.
Move the screen up/down using the ▲ or ▼ button after
selecting the Position by pressing the ► or ENTER button.
− Zoom: Magnify the size of the picture vertically on screen.
− 4:: Sets the picture to 4:3 normal mode.
− Just Scan: Use this function to see the full image without any cutoff when HDMI(720p/1080i),
Component(1080i) signals are input.
After selecting Just Scan in HDMI (100i) or Component (100i) mode: Press the ◄ or ► button
to select Position, then press the ENTER button. Press the ▲, ▼, ◄ or ► button to move the
picture. Reset: Press the ◄ or ► button to select Reset, then press the ENTER button. You can initialize the setting.
With the HDMI Just Scan picture size, depending on the AV devices, the screen may be cut off
or a specific colour appears on the screen.
For an HDMI (1080p) connection of 24, 25, 30, 50, and 60 Hz, and for a Component (1080p)
connection of 50 and 60Hz, only the input source is supported.
You can change the picture size simply by pressing the P.SIZE button on the remote control.
Depending on the input source, the picture size options may vary.
The items available may differ depending on the selected mode.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Colour Tone
Size
Screen Mode
Digital NR
DNIe
HDMI Black Level
Real 100Hz Demo
English - 
TV/DTV
Tint (G/R)
: G50/R50
Detailed Settings
Picture Options
Picture Reset
- / --
P
Picture Options
:
Cool2
:
Cool1
Normal
:
Warm1
Warm2
: 2min
: Off
Move
Enter
Return
TTX/MIX
MENU
P.SIZE
GUIDE
SUBT.
BN59-00705A
Continued...

Advertisement

Chapters

Table of Contents

This manual is also suitable for:

Ps50a42

Comments to this Manuals

Symbols: 0
Latest comments: