Inserting The Battery Pack And Memory Card - Canon PowerShot SX700 HS Getting Started

Hide thumbs Also See for PowerShot SX700 HS:
Table of Contents

Advertisement

Initial Preparations

Inserting the Battery Pack and Memory Card

Terminals
Battery Lock
Terminals
4
Open the cover.
1
Slide the cover ( ) and open it ( ).
Insert the battery pack.
2
While pressing the battery lock in the
direction of the arrow, insert the battery
pack as shown and push it in until it clicks
into the locked position.
To remove the battery pack, press the
battery lock in the direction of the arrow.
Check the card's write-protect
3
tab and insert the memory card.
Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked position. Slide the tab
to the unlocked position.
Insert the memory card facing as shown
until it clicks into the locked position.
To remove the memory card, push it in
until you feel a click, and then slowly
release it.
Close the cover.
4
Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents