AMX NMX-ENC-N1122 Instruction Manual page 57

KVM Page Options
TABLE 25
Option
USB Enable
Permission Level
Connect to Encoder IP
Address
Switch/Disconnect
KVM Advanced Settings Enable to access the Advanced settings described below.
KVM Encoders
Import KVM CSV
Export KVM CSV
Reset USB and KVM
Settings
N1000 Series User Manual
Description
Enable to allow the ability to share mouse and keyboard over the network. Enabled by default. When disabled,
the unit works like a non-KVM unit and ignores any keyboard or mouse activity.
Set the permission level for the Decoder. Decoders can only establish USB connection to Encoders with the
same or higher permission level. See the section
page 24 for more information.
Connects the KVM portion of the Decoder to the Encoder with the specified IP address. Video in not affected by
this setting, only KVM functionality.
Switch to or disconnect from the Encoder mentioned above.
View/edit the list of Encoders associated with this Decoder. Here you can Add new/overwrite Encoders to the
list by Name or IP Address as well as assign Hotkey Numbers and Passwords. You can also end the Decoder/
Encoder association by clicking the Remove button.
Click the Choose File button and browse to the KVM CSV file on your computer that you would like to use to
configure the unit. Then click Upload. For more information, see the section
Security Features) on page 24.
Click the Download KVM CSV Export link to retrieve the current KVM CSV configuration file.
Resets all USB and KVM settings.
Decoder Configuration Options
Advanced KVM Setup (With Added Security Features)
Advanced KVM Setup (With Added
on
57