Change Password; Software Section - AMX NMX-ENC-N1122 Instruction Manual

Change Password

To change the N1000 Decoder interface password, enter the current password in the field labeled Old Password, and enter a new
password in the New Password and Conf irm Password fields. Click Change PW to accept the new password.
Change Password
FIG. 46
NOTE: This password needs to match N-Able's stored password to allow auto-login using N-Able.

Software Section

The Software section of the Settings page is shown in
Software Section
FIG. 47
Settings Page: Software Section
TABLE 18
Option
Serial
MAC Address
Firmware Version
Web Version
Factory Restore
Reboot
N1000 Series User Manual
Figure
Description
Displays the serial number of the N1000 Decoder.
Displays the MAC address of the network interface of the N1000 Decoder.
Displays the date code for the currently running version of the N1000 Decoder internal firmware.
Displays the date code for the currently running version of the web interface.
Click to restore the device to the original factory settings. This resets everything except the IP address
(including name, stream number, serial settings, etc.).
Click to reboot the device (does not affect current configuration).
47. Options are described in Table
Decoder Configuration Options
18.
49