AMX NMX-ENC-N1122 Instruction Manual page 44

Settings Page: Decoder Setup Section (Cont.)
TABLE 13
Option
Lineout Volume
Enable HDMI Audio
Advanced Settings
RS232 Settings
Allow SVSI Multicast
Disable P1
Cancel
Save
N1000 Series User Manual
Description
This slider controls the output gain on the analog audio
output. By default, it controls both the left and right
lineout channels. Click the Set Left/Right link to control
channels individually.
Set HDMI audio to be disabled, enabled, or selected
automatically based on the source.
Refer to Advanced Settings on page 45 for details on
the options available from this link.
Refer to RS232 Settings on page 47 for details on the
options available from this link.
Disable this option to prevent the port from outputting
multicast video traffic.
Completely disables the P1 port for all traffic.
Click to return all controls to the last saved
configuration.
Click to accept changes made to these controls.
Decoder Configuration Options
Notes
ON forces audio on at all times. AUTO reads the EDID
of the connected device to determine whether or not
to send audio.
Particularly useful if you are connecting a non-SVSI
device to a port for network-based control.
Once disabled, anything connected to the P1 port will
no longer be available on the network.
44