Make sure all relevant equipment is properly connected (as
illustrated on the previous pages) before connecting the unit to a
wall socket and turning on the power.
Powering the TV
To turn the power on or off:
Plug the power cord into a suitable power point, then turn on the power
at the outlet.
Press the POWER button, on the lower side of the back panel (or on the
remote control, making sure to aim it at the sensor at the front of the TV);
the indicator will glow blue. Press it again to power off (standby mode);
the indicator will glow red.
When you switch on the TV for the first time, the First Time Setup menu will be
displayed on the screen, as illustrated below.
OSD language: Use the
press the OK button to go to the next step.
After Sales Support
/ buttons to select your OSD language and then
1300 886 649