Omega Engineering FL900 Series Operator's Manual

Heavy duty flowmeters

Operator' s Manual

bL'

Duty

Flowmeters

Heav

S&es

Table of Contents

Need help?

Do you have a question about the FL900 Series and is the answer not in the manual?

Page 1 S&es Flowmeters Heav Duty bL’ Operator’ s Manual...
Page 2 Unpack ing Remove the Packing List and verify that you have received all equipment, including the FL900 Series Heavy Duty Fiowmeter (1) Extractor Tool (1) Operator ’ s Manual (1) If you have any questions about the When you receive the shipment, inspect the dling in transit.
Page 3 In closed thermal transfer or cooling systems, and contraction and possible fluid leaks at the threaded connections. Handle the meter carefully during installation. Use an appropriate amount of Teflon tape on external threads before making connections. Do not use paste or stick type thread sealing products.
Page 4 FL900 Series flowmeters hove O-ring glass tubes to fail. Glass tube flowmeters should not be 200°F (93°C). Flowmeters can be used in air Extra caution must be exercised when flowmeters are used in high pressure tars should be installed at the cylinder and at the inlet of the meter.