3. Configure these settings:
Add Wi-Fi network: Connect to a new Wi-Fi network. For more information,
Scan: Search for available Wi-Fi networks.
Wi-Fi Direct: Connect to other Wi-Fi Direct devices. For more information, see
Other Wi-Fi Settings
Set up and manage wireless access points.
2. Touch Wi-Fi, and then touch the OFF/ON switch to turn Wi-Fi on. Wi-Fi must be on to
to configure these settings:
Network notification: Phone alerts you when a new Wi-Fi network is available.
Sort by: Choose how available Wi-Fi networks are listed on the screen after a
Keep Wi-Fi on during sleep: Specify when to switch from Wi-Fi to mobile data
for data communications, when the phone goes to sleep (when the backlight
goes out). This setting can affect data usage, and the behavior of devices you
connect to your phone, such as when using it as a hotspot.
Always allow scanning: When enabled, Google Location Service and other
applications can scan for Wi-Fi networks, even when Wi-Fi is turned off.
Smart network switch: Auto switch between Wi-Fi networks and mobile
Wi-Fi timer: Automatically connect or disconnect from a Wi-Fi network, using the
Starting time and Ending times you set.
Install certificates: If you have certificates stored on an installed optional
memory card (not included), you can use this option to install the certificates.
MAC address: View your phone's MAC address (not configurable).
IP address: View your phone's IP address (not configurable).
> Settings > Connections tab.