Changing The Dust Bag - Siemens VS08G series Instructions For Use Manual

Changing the filter
Downloaded From Vacuum-Manual.com Manuals
14
Replacing the MEGAfilt
If the dust bag change indicator lights up brightly
and uniformly when the nozzle is lifted from the floor
and the vacuum is on its highest setting, you
should change the dust bag, even if it is not yet full.
In this case it is essential to change the dust bag due
to the type of material it contains.
Turn the dust compartment locking lever in the
direction of the arrow to open the dust compartment
cover.
Seal the MEGAfilt
®
locking tab and then remove it.
Place a new MEGAfilt
holder and close the dust bag compartment cover.
Caution: The dust bag compartment cover will
!
only close when the MEGAfilt
bag, textile filter or dust collector has been
inserted.
If the dust bag change indicator continues to
light up after the dust bag has been changed,
please check whether the nozzle, pipe or
vacuum hose are obstructed.
SuperTEX dust bag
®
SuperTEX dust bag by pulling the
SuperTEX dust bag in the
®
® SuperTEX dust
en