Using the Travel Charger
Important! Verify that the phone battery is installed prior to
connection. If the battery is not properly installed
and the charger is connected, the handset may
power off and on continuously, preventing proper
1. Plug the flat end of the Travel Charger into the
charging/USB port and the other end into a standard
AC wall outlet.
2. When charging is finished, remove the flat end from
the interface connector port on the phone.
Note: Failure to unplug the wall charger before you remove
the battery, can cause damage to the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain, the battery icon ( ) blinks and the phone sounds a
warning tone at regular intervals. In this condition, your
phone conserves its remaining battery power, not by turning
off the backlight, but by entering the dimming mode. For a
quick check of your battery level, glance at the battery
charge indicator located in the upper-right corner of your
phone's display. Solid color ( ) indicates a full charge.
When the battery level becomes too low, the phone
automatically turns off.
You can also choose to display a percentage value. Having a
percentage value onscreen can provide a better idea of the
remaining charge on the battery.
From a Home screen, touch
Show battery percentage.