Bluetooth Self Tests In Phoenix - Nokia RX-44 Service Manual

4. Choose Testing→Bluetooth LOCALS .
5. Locate SB-6's serial number (12 digits) found in the type label on the back of SB-6.
In addition to SB-6, JBT-3, JBT-6 and JBT-9 Bluetooth test boxes can be used.
Bluetooth LOCALS window, write the 12-digit serial number on the
6. In the
Counterpart BT Device Address line.
This needs to be done only once provided that SB-6 is not changed.
7. Place the SB-6 box near (within 10 cm) the BT antenna and click Run BER Test.
Results
Bit Error Rate test result is displayed in the

Bluetooth self tests in Phoenix

Steps
Phoenix service software.
1. Start
2. From the File menu, choose Open Product, and then choose the correct type designator from the
Product list.
3. Connect the phone to a docking station in the local mode.
4. Choose Testing→Self Tests .
5. Choose the following Bluetooth related tests:
• Bluetooth
6. To run the tests, click Start.
Page 4 –44
Bit Error Rate (BER) Tests pane in the Bluetooth LOCALS window.
Figure 25 BER test result
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
BB Troubleshooting and Manual Tuning Guide
RX-44
Issue 1