Advertisement
Available languages
Available languages
This symbol indicates that the machine is
in conformance with the applicable
European directive.
SPECIAL INSTRUCTIONS
The disc cutter is designed to provide safe and
reliable service in operating conditions corresponding
with the instructions, but it can present dangers for
the user and risks of damage, consequently regular
on site inspection is necessary to ensure :
• Perfect technical condition (use for the purpose
for which it is intended and taking into account
any risks, and correction of any malfunction
detrimental to safety).
• Use of a diamond disc for water lubricated
cutting of marble, stone, granite, brick and
facings (porcelain, glazed tiles, ceramics, etc).
The use of any other disc is forbidden (abrasive,
saw, etc).
• Competent personnel (qualifications, age,
training, education) who have studied the manual
in detail before starting work: any fault of an
electrical or other nature must be checked by a
competent person (electrician, maintenance
foreman, authorized dealer, etc).
• That the warnings and instructions marked on
the machine are followed (adequate personal
protection, correct use, general safety
instructions, etc).
• That no modification, transformation or addition
is detrimental to safety and that it is carried out
without prior authorization from the manufacturer.
• Respect of the maintenance intervals and
periodical checks recommended.
• That only genuine spare parts are used for
repairs.
Instruction plate
MANUFACTURER
TYPE
TYPE
N° SERIE
SERIAL
FABRICATION
ANNEE DE
FABRICATION
YEAR
WEIGHT
POWER
MASSE UTILE
Kg
PUISSANCE
kW
PLAGE DE
MAXI TOOL
VOLTAGE
Ø MAXI OUTIL
mm
V
TENSION
BORE
Ø ALESAGE
mm
FREQUENCE
Hz
FREQUENCY
SPEED
INTENSITY
T/MN - RPM
INT. UTIL.
A
1
Use
•
Use : Sawing porcelain, glazed tiles, ceramics,
etc...
• Tools : Water lubricated diamond
disc diameter 300 mm - bore 25.4
mm (AL).
(Information from your usual
supplier).
Saw blade
Carborundum
disc
Do not use the saw for any purpose for which
it is not designed (using a saw blade or
abrasive disk which do not conform to the
instructions for use).
2
Technical specifications
VOLTAGE
POWER
CURRENT
± 5 %
1 kW (1,3 CV)
230 V 50 Hz
4,5 A
1 kW (1,3 CV)
115 V 50 Hz
9,4 A
•
Motor speed : 2800 rpm
• Disc speed : 2800 rpm
• Electrical protection : IP 54
90°
TP
45°
l
E
E
P
L
• Depth of cut (E) :
- at 90° : 50 mm
• Length of cut (L) :
- 660 mm - thickness 10 mm
• Useful width (w) : unlimited
• Dimensions (mm) L x W x H :
- with legs :
1160 x 575 x 1200
- bench :
1060 x 575 x 600
• Unladen weight : 43 kg
• Disc cooling by water spray into the disc casing.
• Minimum tank capacity :
- 15 l
• Water pump : adjustable flow
• Electricity supply :
- 230 V : H07-RNF 3 x 1.5
2
- L 2 m
- 115 V : H07-RNF 3 x 2.5
2
- L 2 m
POWER
PRESSURE
VIBRATION
MODEL
LEVEL
LEVEL
LEVEL
Depending
Lwa (dB)
Lpa (dB)
G ENV
on model
EN ISO 3744
EN ISO 4871
25349
1 KW - 230 v
66
66
0,1
0,3
1 KW - 115 v
65
65
Page 20
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
