Period - Bosch DIVAR AN 3000 Operation Manual

DIVAR AN 3000 / DIVAR AN 5000
6.8.2

Period

Figure 6.23: Period setup
See here the period setup screen for assigning periods for alarms and detection. Configure a
period as follows:
1.
2.
3.
4.
5.
Bosch Security Systems
Choose a day of the week from the drop down menu in the top field.
Select the check box for one of the six time periods and use the keypad to enter a begin
time and end time for activating detect/alarm (the default is 24-hour activation).
Repeat step 2 for any other required time periods; notice that the time bar for that day
(see bottom half of screen) will show a graphical representation of the active times for
each weekday.
When you have correctly assigned a day, continue with the next day. If the time periods
are the same as the first day, then a quick way to do this is:
– click <Copy> to access a Copy screen
– here you see that the assigned day is grey
– select each of the days that have a similar setup (checkbox is ticked) and click <OK>
– the same time periods for the first day now apply to all selected days
If you wish to assign active time(s) for a work day or a free day (holiday) that are the
same for each work day or free day, do this as follows:
– choose either Work day or Free day from the drop down menu and press <Setup> –
the following screen appears:
Operations Manual
Configuration | en 65
2015.10 | v2.3 | AM18-Q0669