Rear Shock Absorber
Rebound Damping Force Adjustment
•
To adjust the rebound damping force, turn the lower
damping adjuster [A] to the desired position, until you
feel a click.
○
The standard adjuster setting for an average-build rider
of 68 kg (150 lb) with no passenger and no accessories
is the 1 1/4 turns out from the fully clockwise position.
Rebound Damping Force Adjustment
Adjuster
Damping
Position
Force
3 turns out
Weak
↑
↑
↓
↓
0
Strong
Spring Preload Adjustment
•
Remove the rear shock absorber from the frame (see
Rear Shock Absorber Removal).
•
Loosen the locknut and turn out the adjusting nut to free
the spring.
Special Tool - Hook Wrench T=3.2 R37: 57001-1539
•
To adjust the spring preload, turn in the adjusting nut [A]
to the desired position and tighten the locknut [B].
Spring Length [C]
Spring Preload Setting
Standard:
Spring length 190.5 mm (7.50 in.)
Spring length 185.5 ∼ 195.5 mm
Usable Range:
(7.303 ∼ 7.697 in.)
○
The standard adjusting nut setting for an average-build
rider of 68 kg (150 lb) with no passenger and no acces-
sories is 190.5 mm (7.50 in.) spring length.
•
Remove the bolts [A], left foot guard [B] and chain cover
[C] (see Drive Chain Removal in the Final Drive chapter)
for turning the hook wrench easily.
Setting
Load
Road
Soft
Light
Good
↑
↑
↑
↓
↓
↓
Hard
Heavy
Bad
Speed
Low
↑
↓
High
SUSPENSION 13-19
Comments to this Manuals
Latest comments: