Disassembly Instruction - Nokia n800 Service Manual

CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
11.

DISASSEMBLY INSTRUCTION

1. Needed tools: a Torx driver, a torque driver, a bit holder, a
Torx Plus size 4 bit, a Torx Plus size 6 bit, metal tweezers, a
dental pick, the SS-93, the SRT-6 and the DC-plug
3. Remove the STYLUS ASSEMBLY.
5. Discard the screws after removal.
Service Manual N800 RX-34
Page 14 (32)
CONFIDENTIAL
2. Press the RELEASE BUTTON and remove the BATTERY COVER
ASSEMBLY. Remove the BATTERY if inserted.
4. Undo the two Torx Plus size 4 screws in the order shown.
6. Remove the STANDING SUPPORT PAINTED. Note the correct
position when assembling the unit.
Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 2.0
MGR
14.Mrz.2007