IP Series Codec
Installation and Operating Instructions
PRODUCT SAFETY
Installation is only to be carried out by competent, qualified and experienced personnel. Wire in accordance with
the National Wiring regulations applicable to the country of installation. Failure to do so can result in death or
injury by electric shock. A means of disconnecting the equipment from the mains supply must be provided as part
of the installation and must be situated close by.
BEFORE UNDERTAKING ANY INSTALLATION OR MAINTENANCE, THE MAINS SUPPLY MUST BE DISCONNECTED.
Each internal printed circuit board carries a replaceable fuse. For continued protection against the risk of fire,
replace with a fuse of the same type - 1.5 A (T) 125V.
Electrical Safety
ELECTROMAGNETIC COMPATIBILITY (EMC)
Radio Frequency Emmissions
This is a Class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
Immunity
MANUFACTURERS DECLARATION OF CONFORMANCE
UNPACKING
Page 4