GE Pt970 Owner's Manual page 36

Special features of your lower oven control.
+
+
+
36
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds until
the Clear/Off pad is pressed. This continuous
6-second beep may be canceled.
To cancel the 6-second beep:
Press the Bake and Broil Hi/Lo pads at
the same time for 3 seconds until the
display shows SF.
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour military
time clock or black out the clock display, follow
the steps below.
Press the Bake and Broil Hi/Lo pads at
the same time for 3 seconds until the
display shows SF.
Auto Recipe Conversion
™
When using convection bake, the Auto Recipe
Conversion feature will automatically convert
entered regular baking temperatures to
convection baking temperatures.
Once the feature is activated, the display will show
the actual converted (reduced) temperature. For
example, if you enter a regular recipe temperature
of 350°F and press the Start pad, the display will
show CON and the converted temperature of
325°F.
NOTE: This feature does not convert convection
bake cooking times, only regular baking
temperatures.
Press the Kitchen Timer On/Off pad. The
display shows CON BEEP (continuous
beep). Press the Kitchen Timer On/Off pad
again. The display shows BEEP. (This
cancels the one beep every 6 seconds.)
Press the Start pad.
Press the Clock pad once. The display will
show 12 hr. If this is the choice you want,
press the Start pad.
Press the Clock pad again to change to
the 24-hour military time clock. The display
will show 24 hr. If this is the choice you
want, press the Start pad.
Press the Clock pad again to black out the
clock display. The display will show OFF. If
this is the choice you want, press the Start
pad.
NOTE: If the clock is in the black-out mode, you
will not be able to use the Delay Start function.
To activate the feature:
™
Press the Bake and Broil Hi/Lo pads at the
same time for 3 seconds, until the display
shows SF.
Press the Convection Bake pad. The
display will show CON OFF. Press the
Convection Bake pad again. The display
will show CON ON.
Press the Start pad.
To d eactivate the feature, repeat steps 1–3
above but press the Start pad when CON OFF
is in the display.