Igmp Group-Policy - Huawei Quidway S3900 series Command Manual

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Caution:
New groups cannot be added when the number of IGMP multicast groups has
exceeded the configured limit.
When the limit on the number of IGMP packets is 1, the new group enjoys priority,
that is, the system will automatically replace the former multicast group with the new
multicast group, and the former multicast group will leave the interface
automatically.
If the number of existing multicast groups on the interface is more than the
configured limit, the system will remove some old groups automatically to satisfy the
configured limit.
Example
# Limit the maximum number of IGMP groups on Vlan-interface10 to 100.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Vlan-interface 10
[Quidway-Vlan-interface10] igmp group-limit 100

5.1.5 igmp group-policy

Syntax
igmp group-policy acl-number [ 1 | 2 | port interface-list
undo igmp group-policy [ port interface-list
View
VLAN interface view
Parameter
acl-number: Number of the basic IP access control list number, defining a multicast
group range. The value ranges from 2000 to 2999.
1: IGMP version 1.
2: IGMP version 2. If IGMP version is not specified, version 2 will be used by default.
port: Limits the IGMP packets passing the port and matching with the ACL rules.
interface-list: Forwarding port list in the form of interface-list = { interface-type
interface-number [ to { interface-type interface-number } ] }&<1-10>. The interface-type
argument refers to the port type, and the interface-number argument refers to the port
Huawei Technologies Proprietary
5-5
Chapter 5 IGMP Configuration Commands