Sony STR-DA4400ES Service Manual page 24

STR-DA4400ES
Items
Super reset
RAM watch menu
EERROM debug
Protector on/off
Model/destination change
Audio swap
Decoder select
Volume value display (FL/FR)
Volume value display (SL/SR)
Volume value display (CT/SW)
Volume value display (SBL/SBR)
DAC mute information disclosure 1
DAC mute information disclosure 2
2nd volume value display
FL display duty change
24
Display
SUPER RESET [XXX]
XXX
EEPROM [∗∗∗∗] [XX]
PROTECTOR ON/OFF [XXX]
MODEL [##### ∗∗∗∗ XX]
SWAP [XXXXXXXXXXX]
DECODER SEL [XXXX]
FL∗∗∗∗ FR XXXX
SL∗∗∗∗ SR XXXX
CT∗∗∗∗ SW XXXX
SBL∗∗∗∗ SBR XXXX
DAC MUTE U XXXXXXXX
DAC MUTE L XXXXXXXX
2nd VOLUME XXX
DARK OUT DUTY [XXX%]
Remark
Not used for the servicing
If super reset is performed, "up convert signal level adjustment"
will also be initialized
When EEPROM initialization is required, perform the "memory
clearing mode"
XXX: For monitor of various internal RAM
(for design evaluation)
∗∗∗∗: EEPROM address, XX: EEPROM data
XXX: ON or OFF
#####: Model, ∗∗∗∗: Destination, XX: At or fx
Switching with [M] [m] button of the remote commander
XXXX: AUTO, LEGACY, DDPLUS, TRUEHD, DTSEXP, MP-
3SUR (for debug)
∗∗∗∗: Front L-ch volume value, XXXX: Front R-ch volume value
∗∗∗∗: Surround L-ch volume value, XXXX: Surround R-ch
volume value
∗∗∗∗: Center volume value, XXXX: Sub woofer volume value
∗∗∗∗: Surround back L-ch volume value, XXXX: Surround back
R-ch volume value
Display of module information to demand muting in system
controller (for design evaluation)
Display of module information to demand muting in system
controller (for design evaluation)
XXX: 2nd room volume value (00 to ∞)
XXX: Duty value of FL display (0% to 100%)