Sony STR-DA4400ES Service Manual page 148

STR-DA4400ES
D-VIDEO BOARD IC3604 YGV629-VZ (OSD CONTROLLER)
Pin No. Pin Name
1 PLLVDD
2 FILTER
3 PLLVSS
4 NC
5 to 10 PLLCTL5 to PLLCTL0
11 DTCKS_N
12 DTCK_IN
13 VSS
14 VDD
15 to 22 D0 to D7
23 WAIT_N
24 READY_N
25 INT_N
26 VDD
27 VSS
28 CS_N
29 WR_N
30 RD_N
31 to 33 PS2 to PS0
34 SDOUT
35 SDIN
36 SCS_N
37 SCLK
38 SER_N
39 RESET_N
40 VSS
41 VDD
42 MA0
43 to 47 MA1 to MA5
48 VSS
49 to 54 MA6 to MA11
55 VDD
56 VSS
57 to 62 MA12 to MA17
63 VSS
64 to 70 MA18 to MA24
71 VDD
72 VSS
73 MWE_N
74 MOE_N
MD15, MD7, MD14,
75 to 80
MD6, MD13, MD5
81 VSS
82 VDD
MD12, MD4, MD11,
83 to 90 MD3, MD10, MD2,
MD9, MD1
91 VSS
92 VDD
93, 94 MD8, MD0
95 RAHZ_N
96 to 98 XTEST2 to XTEST0
99 VSIN_N
100 HSIN_N
101 NC
102 AVDD
103 R
104 G
105 B
148
I/O
- Power supply terminal (+3.3V)
I Filter connection terminal for internal PLL
- Ground terminal
- Not used
I PLL setting terminal
I Clock signal input terminal
I Clock signal input terminal
- Ground terminal
- Power supply terminal (+3.3V)
I/O Two-way data bus with the video system controller and S-RAM
O Wait signal output to the video system controller
- Not used
O Interrupt signal output to the video system controller
- Power supply terminal (+3.3V)
- Ground terminal
I Chip select signal input from the video system controller
I Write enable signal input from the video system controller
I Read enable signal input from the video system controller
I Address signal input from the video system controller
O Serial data output terminal
I Serial data input terminal
I Chip select signal input terminal
I Serial data transfer clock signal input terminal
I CPU interface select setting terminal
I Reset signal input from the video system controller
- Ground terminal
- Power supply terminal (+3.3V)
O Address signal output terminal
O Address signal output to the fl ash memory
- Ground terminal
O Address signal output to the fl ash memory
- Power supply terminal (+3.3V)
- Ground terminal
O Address signal output to the fl ash memory
- Ground terminal
O Address signal output to the fl ash memory
- Power supply terminal (+3.3V)
- Ground terminal
O Write enable signal output to the fl ash memory
O Output enable signal output to the fl ash memory
I/O Two-way data bus with the fl ash memory
- Ground terminal
- Power supply terminal (+3.3V)
I/O Two-way data bus with the fl ash memory
- Ground terminal
- Power supply terminal (+3.3V)
I/O Two-way data bus with the fl ash memory
- Not used
- Not used
I Vertical sync signal input terminal
I Horizontal sync signal input terminal
- Not used
- Power supply terminal (+3.3V)
O Analog video signal (R) output terminal
O Analog video signal (G) output terminal
O Analog video signal (B) output terminal
Description
Not used
Not used
Not used
Not used
Not used
Not used
Fixed at "H" in this set
"L": reset
Not used
Not used
Not used
Not used
Not used
Not used