Setup/System 2 - Honda 2008 GL1800 Goldwing Navigation System Owner's Manual

US_MCAP.book Page 87 Thursday, March 15, 2007 4:00 PM

Setup/System 2

To move to screen 2, highlight the 2 field
at the top of the Setup/System 1 screen,
and press ENT. The Setup/System 2
screen appears.
GPS Initialize
You do not need to initialize your GPS
setting when you start operating the
system. The only time you will need to
initialize the system is if your
motorcycle is transported for a
considerable distance or if the battery is
disconnected for a long time. To
initialize the GPS function, highlight OK
and press ENT.
Downloaded from www.Manualslib.com
The GPS Initialize screen displays your
longitude and latitude (Location field) as
well as the time (Time field). With OK
highlighted, press ENT.
The screen will double-check your
decision to reset. With Yes highlighted,
press ENT.
manuals search engine
Setup/System 2
The GPS Initialize screen reappears with
the Location (coordinates) area blank
until the system inserts the reset
coordinates. Press BACK (or highlight
Done and press ENT) to return to Setup/
System 2 screen.