US_MCAP.book Page 126 Thursday, March 15, 2007 4:00 PM
Edit Route
Adding a Road as a Via
You may enter a section of a road (such
as a scenic ride) as a via to your route by
using the White Arrow Point Locator
feature.
1. Position the white arrow where you
want to end riding the road on the
map screen.
NOTE:
For more information about the White
Arrow Point Locator, see
Downloaded from
www.Manualslib.com
2. Bring up the Point Review Screen by
pressing ENT.
3. Select the Add as Via function.
4. Position the white arrow point locator
where you want to start your ride on
the road and repeat the process to add
it as a via.
It may be necessary to create additional
points along the road to make sure the
system does not route you off the
selected road to calculate what it
considers a more direct route.
page
51.
manuals search engine
5. With Route to It highlighted, press
ENT. A Route Calculate Screen
appears.
NOTE:
For more information about the Route
Calculate Screen, see
page
66.
With Calculate highlighted, press ENT.
The system calculates the route to the
destination and starts the voice and route
guidance.