Olympus STYLUS-7010/-7010 Instruction Manual page 30

Creating panoramic images
[G PANORAMA]
G PANORAMA
Submenu 2
COMBINE IN
CAMERA 1
*1
COMBINE IN
CAMERA 2
COMBINE IN PC
Not available in s mode (p. 17).
*1
The [A IMAGE QUALITY] (p. 25) setting
cannot be changed.
The focus, exposure (p. 14), zoom position
(p. 19), and [WB] (p. 26) are locked at the fi rst
frame.
The fl ash (p. 19) is fi xed to $ (FLASH OFF)
mode.
"Playing back panorama images" (p. 24)
30 EN
Application
Three frames are taken and
combined by the camera. The user
only composes the shots so that the
target marks and pointers overlap,
and the camera automatically
releases the shutter. The shooting
functions are already preset to the
optimum settings for panoramic
shooting.
Three frames are taken and
combined by the camera. The user
composes the shots using the guide
frame and manually releases the
shutter.
The frames that were taken are
combined into a panorama image
using the OLYMPUS Master 2
software from the provided CD-ROM.
Pictures are taken in the last [ISO] or
[J s] settings. (Excluding certain
scenes.)
Taking pictures with
[COMBINE IN CAMERA 1]
1 Press the shutter button to take the fi rst
frame.
: K s
2 Move the camera slightly in the direction of
the second frame.
Target mark
3 Move the camera slowly while keeping it
straight, and stop the camera where the
pointer and target mark overlap.
●
The camera releases the shutter automatically.
To combine only two pictures, press the
E button before taking a third frame.
4 Repeat Step 3 to take a third frame.
●
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without saving
an image, press the m button.
If the shutter does not automatically release,
try [COMBINE IN CAMERA 2] or [COMBINE IN
PC].
Pointer
CANCEL
MENU
Screen when combining
images from left to right
CANCEL
MENU
SAVE OK
SAVE OK