Sony BDV-L600 Operating Instructions Manual page 25

Attaching the covers
After you have made all the connections, organize the cables and attach the panel cover and the stand
cover by following the Steps below.
1
Place the main unit on its face.
• Make sure to place the main unit on a soft thick cloth to prevent damaging the main unit.
2
Bring together the cables (except the FM wire antenna (aerial)), guide them through the
slot at the right of the main unit, behind the clamp (A), and through the slot at the
bottom of the main unit.
Thread the FM wire antenna (aerial) through the small indentation at the rear of the main
unit.
3
Thread the AC power cord (mains lead) through the gap on the main unit by securing it
behind the tabs, guide it through the slot at the left of the main unit, behind the clamp
(B), and through the slot at the bottom of the main unit.
FM wire antenna (aerial)
Tabs
25
US