Table of Contents
Advertisement
Basic operations
Resuming playback
The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position later.
To memorize the interrupted position
¶ During playback
Press 7, or press DVD STANDBY/ON
panel.
The unit memorizes the interrupted position.
• If you interrupt playback by pressing 7 and then turn off the power, the memory is not cleared.
To resume playback
¶ While the disc you interrupt playback last time is still in the disc tray
Press 3.
The unit starts playback from the position where you interrupted playback last time.
• To clear the resume position memory
Carry out one of the followings.
*Take out the disc from the tray.
*Press 7 while stopped.
*Turn on the unit by pressing DVD STANDBY/ON
NOTES
• The resume function does not work with Audio CD and MP3 discs.
• In the case of a Video CD/SVCD disc with PBC function, the unit may resume playback from a point slightly earlier or later than
the resume point you stored.
Downloaded From DvDPlayer-Manual.com JVC Manuals
28
on the remote control unit or STANDBY/ON
(on the remote control) or STANDBY/ON
on the front
(on the front panel).
Advertisement
Table of Contents
