Troubleshooting - JVC KW-AVX706 Instructions Manual

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
• No sound comes out of the center speaker.
• No sound comes out of the subwoofer while
playing in stereo.
• The monitor is not clear and legible for
watching the playback picture.
• Remote controller does not work.
• "Position Error Push Open Key" appears on the
monitor.
• "Mecha Error Push Reset" appears on the
monitor, and the panel does not move.
• "SD Loading Error" appears on the monitor.
• The unit does not work at all.
• SSM automatic presetting does not work.
• Static noise while listening to the radio.
• Disc can be neither recognized nor played .
• Disc cannot be ejected.
• Recordable/Rewritable discs cannot be played
back.
• Tracks on the Recordable/Rewritable discs
cannot be skipped.
• "Disc Error Please Eject" appears on the
monitor.
• "Eject Error" or "Loading Error" appears on the
monitor.
• Sound and pictures are sometimes interrupted
or distorted.
• No playback picture appears on the monitor.
• The external monitor shows black and white
wavy pictures.
• "Region Error Please Eject" appears on the
monitor when you insert a DVD Video.
Remedies/Causes
Center speaker is used only for surround playback. No sound
comes out for stereo playback.
This happens while playing some discs with "Auto" selected
for "Surround On" (☞ pages 21 and 42). Cancel surround.
Sunshine from the windshield may cause this symptom.
Adjust "Bright" and "Contrast" of "Screen Control." (☞
page 38).
Deactivate Dual Zone (☞ page 24).
(While Dual Zone is activated, the remote controller only
functions for operating the DVD/CD player.)
The monitor panel angle has been forcibly adjusted, or
interrupted while opening or closing. Press OPEN/CLOSE.
Reset the unit (☞ page 2).
SD is not inserted fully. Fully insert it into the slot to close
the monitor panel.
Reset the unit (☞ page 2).
Store stations manually.
Connect the antenna firmly.
Eject the disc forcibly (☞ page 2).
Unlock the disc (☞ page 17).
• Insert a finalized disc.
• Finalize the discs with the component which you used for
recording.
Insert the disc correctly again.
Changing the source by pressing SOURCE will solve this
error.
• Stop playback while driving on rough roads.
• Change the disc.
Parking brake wire is not connected properly. (☞
Installation/Connection Manual.)
"NTSC/PAL" setting is not correct. Select an appropriate
setting (☞ page 39).
Region code is not correct (☞ page 5).
49