JVC KW-AVX706 Instructions Manual page 283

Enjoying surround sounds
You can enjoy multi-channel surround
playback through the front, center, surround
speakers.
• Without connecting (and activating) center
speaker and surround speakers, you cannot
enjoy surround playback .
MULTI: For multi-channel encoded sources
such as Dolby Digital*
Audio. (When activated, "MULTI" is shown on
the disc information screen.)
Dolby Pro Logic II (Movie/Music): For 2
channel sources except for MPEG 2-channel
discs. (This can also be used for SD card
playback. ☞ page 27)
To turn on the surround...
1
Setup
Surround
Equalizer
Sound
Mode
List
2
Setup
Surround
Equalizer
Mode
List
3
Surround Off
Surrond On
• Surround Off: Deactivates surround.
• Surround On: Activates surround = go to
the following steps.
4
Auto
Dolby PLII Movie
Dolby PLII Music
Auto
Dolby PLII Movie
Dolby PLII Music
Auto
Dolby PLII Movie
Dolby PLII Music
1 , DTS* 2 , and DVD
• Auto: "MULTI" surround is activated when
multi-channel digital signals are detected.
• Dolby PLII Movie: Activates Dolby Pro
Logic II Movie.
• Dolby PLII Music: Activates Dolby Pro
Logic II Music = go to the following step.
5
Only when selecting "Dolby PLII
Music"
Panorama
CenterWidth
• Panorama: Select "Panorama On" to add
wraparound sound effect.
• CenterWidth: Adjust the center image
so it may be heard only from the center
speaker, only form the left/right front
speaker as a "phantom" center image, or
various combination of these speakers. As
the number increases, the "phantom" effect
becomes stronger (normally select "4").
On the remote controller:
SHIFT
RM-RK240
1
SURROUND
• You cannot change the "Dolby PL II Music"
settings using the remote controller.
1
* Manufactured under license from Dolby Laboratories. Dolby,
Pro Logic, MLP Lossless, and the double-D symbol are
trademarks of Dolby Laboratories.
2
* "DTS" and "DTS Digital Surround" are registered trademarks
of Digital Theater Systems, Inc.
21
SURROUND
OPERATIONS