Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
Selecting the Sound Mode
When you set to Dual f-g, the current sound mode is
displayed on the screen.
Stereo ↔ Mono
Dual f ↔ Dual g
Mono ↔ Stereo
Mono ↔ Dual f
If the stereo signal is weak and an automatic switching
occurs, then switch to the mono.
Only activated in stereo sound signal.
Only available when the Input source is set to TV.
Setting the Time
■ Clock: Setting the clock is for using various timer
features of the TV.
The current time will appear every time you press
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
The antenna must be connected in order to set
the time automatically.
Clock Set: Set the Day, Month, Year, Hour and Minute
Available only when Clock Mode is set to
Time Zone (depending on the country): Select your time
When Country is set to Others, you can use this
This function is only available when the
Clock Mode is set to Auto.
Using the Sleep Timer
: Automatically shuts off the TV
■ Sleep Timer
after a preset period of time. (30, 60, 90, 120, 150 and
To cancel Sleep Timer, select Off.
Setting the On / Off Timer
■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
L Move U Adjust E Enter R Return
On Time / Off Time: Set the hour, minute, and activate
/ inactivate. (To activate timer with the setting you've
chosen, set to Activate.)
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
Antenna (when the Source is set to TV): Select ATV or
Channel (when the Source is set to TV): Select the
Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
If there is no music file on the USB device or the
folder containing a music file is not selected, the
Timer function does not operate correctly.
When there is only one photo file in the USB
device, the Slide Show will not play.
If a folder name is too long, the folder cannot be
Each USB you use is assigned its own folder.
When using more than one of the same type of
USB, make sure the folders assigned to each
USB have different names.