Canon MG6600 series Online Manual page 902

1689
Cause
Printer detected ink out condition (The lamp on the ink tank flashes).
Action
Replace the ink tank and close the operation panel.
An ink tank that was once empty is installed.
Printing under the ink out condition may damage the machine.
If you want to continue printing, you need to release the function for detecting the remaining ink level. To
release this function, press and hold the machine's Stop button for at least 5 seconds, and then release it.
With this operation, releasing the function for detecting the remaining ink level is memorized. Please be
advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing
under the ink out condition or refilled ink tanks.
Note
• If the function for detecting the remaining ink level is disabled, the ink tank in gray is displayed on the
touch screen when checking the current ink level.
Downloaded from ManualsPrinter.com Manuals 902