Canon MG6600 series Online Manual page 863

Hide thumbs Also See for MG6600 series:

Table of Contents

• The specified PDF file contains unprintable data. Some portions may not be

PDF file which contain lot of graphics or hi-resolution images may lose that data or stop before

printing is completed. In this case, print from the computer.

• The card is currently writable from PC. Set to [Not writable from PC].

The card slot is set to Writable from USB PC or Writable from LAN PC.

You cannot print from the memory card when the card slot is set to Writable from USB PC or

Writable from LAN PC. After writing on the memory card, select Not writable from PC in Read/

write attribute under Device user settings.

• Power was not turned off correctly the last time. Press the

The power cord may have been unplugged last while the machine was still on.

Tap OK on the touch screen to dismiss the error.

Notice for Unplugging the Power Cord

• Cannot connect to the server. Please wait a while and try again.

You cannot connect to the server due to some communication error. When you have tried to access a

photo sharing site, it is possible that your photos have been deleted.

Tap OK on the touch screen to dismiss the error, then try again after a while.

Error Regarding Automatic Duplex Printing Is Displayed

appropriate action.

Error Regarding the Power Cord Being Unplugged Is Displayed

The power cord may have been unplugged while the machine was still on.

Check the error message that appears on the computer, then click OK.

The machine starts printing.

Notice for Unplugging the Power Cord

Writing Error/Output Error/Communication Error

If the POWER lamp is off, make sure that the power plug is plugged in, then

turn the machine on.

While the POWER lamp is flashing, the machine is initializing. Wait until the POWER lamp stops flashing and

remains lit.

Make sure that the printer port is configured appropriately in the printer driver.

* In the following instructions, "XXX" signifies your machine's name.

Downloaded from ManualsPrinter.com Manuals

Cannot Print Properly with Automatic Duplex Printing

for unplugging the power cord.

button when turning power off.

and take the

Troubleshooting