Canon MG6600 series Online Manual page 740

Note
• If the Scan standby screen for forwarding the data to the USB-connected computer is displayed on
the touch screen, tap
Select the computer to forward the scanned data following the procedure below.
1. Tap
2. Tap the computer to forward the scanned data.
The Scan standby screen is displayed.
• If you tap Local (USB) on the Select PC screen, the data is forwarded to the USB-connected
computer.
• When you forward the scanned data to the computer using WSD (one of the network
protocols supported in Windows 8.1, Windows 8, Windows 7, and Windows Vista), select
Enable for WSD scan from this device on WSD setting on Other settings in LAN settings
under Device settings.
If you tap Search again, the machine starts searching for the connected computers again.
3. Specify the settings as necessary.
Downloaded from ManualsPrinter.com Manuals
to display the screen for selecting to which you save the data.
PC.
Note
WSD setting
740