Canon MG6600 series Online Manual page 186

5. Prepare a new ink tank.
1. Take a new ink tank out of its package, remove the orange tape (
remove the protective film (
2. Hold the ink tank with the orange protective cap (E) pointing up while being careful not to
block the Y-shape air hole (D).
3. Lift up the tab on the orange protective cap (E) to remove it off GENTLY.
Downloaded from ManualsPrinter.com Manuals
Important
• Handle an ink tank carefully. Do not drop or apply excessive pressure to it.
• If the orange tape remains on the Y-shape air hole (D), ink may splash or the machine may not
print properly.
) completely.
186
) completely, then