General Cd Functions - Silvercrest SAB 160 A1 Operating Instructions Manual

Handling and operation

General CD functions

NOTICE
► Dampness and high humidity can cause the CD player to malfunction.
In this case switch on the vehicle heating to dissipate the dampness before
using the device. Do not subject the device to any extremely high or low
temperatures.
Anti-Shock function (ESP - "Electronic Shock Protection")
The device is equipped with an anti shock function. This function serves to compen-
sate for vibrations, for example on uneven streets, and to provide an uninterrupted
playback even with device movement. When the device is switched on the memory
automatically fi lls with data:
■ with audio CDs for 12 seconds;
■ with MP3 CDs for 75 seconds.
Inserting and removing CDs
♦ Press the button
cally forward.
♦ Push the CD into the CD slot with the inscribed side facing up.
♦ Lock the face plate back into place by folding it upwards. Playback of the
CD begins. In the display appears CD PLAY.
♦ To remove the CD open the face plate again. Press the
The CD will be ejected. The device switches to radio mode.
♦ Immediately remove the CD from the CD slot. If an ejected CD is not removed
within approx. 5 seconds the device will draw it back in, however playback
of the CD will not start.
Title skip
♦ Press the buttons ▸▸I or I◂◂ to select the next and/or previous title.
The title number will be shown in the display.
Fast forward/backward
♦ Hold down the buttons ▸▸I or I◂◂ longer to start fast forward or backward.
SAB 160 A1
to unlock the face plate. The face plate tilts automati-
button.
23
GB
IE