Radio Reset (Reset); Radio Functions - Silvercrest SAB 160 A1 Operating Instructions Manual

Bluetooth car radio
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Handling and operation

Radio reset (RESET)

To reset the device to its factory default settings, press the RESET button with a
pointed object, such as a pen.
NOTICE
To access the RESET button the face plate must be completely detached,
see also the section "Removing the face plate".
Reset the device:
when operating for the fi rst time,
after the cable connection,
if not all function buttons are working,
when an error message appears in the display.

Radio functions

Select frequency range
Press the BD/ENT button to switch between VHF (F1, F2, F3) and medium
wave (M1, M2).
Automatic station search
Press briefl y the buttons I◂◂ or ▸▸I to start a station search. The search will
stop when a station is found.
Manual station selection
Hold down one of the buttons I◂◂ or ▸▸I for two seconds, in the display
appears MANUAL.
Now press the buttons I◂◂ or ▸▸I to change the frequency in steps of
0.05 MHz (VHF) and/or 9 kHz (MW) until the desired frequency is set.
If no button is pressed for approx. two seconds the automatic station search is set
again. AUTO appears in the display.
Saving radio stations
For each frequency range 6 stations can be saved.
Hold down for approx. 3 seconds one of the station buttons 1 to 6 to save
the currently set station. The successful saving is signalised by the showing
of the numbers 1 to 6 in the display.
SAB 160 A1
GB
IE
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents