Specifications; General Safety Rules - Makita BTW200 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Capacities
No load speed (RPM)
Impacts per minute
Max. fastening torque
Battery Charger
Input
Output
Battery Cartridge
Voltage
Charging time
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

GENERAL SAFETY RULES

(FOR ALL BATTERY OPERATED
TOOLS)
WARNING! Read and understand all instructions.
Failure to follow all instructions listed below, may result in
electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS.
Work Area
1. Keep your work area clean and well lit.
Cluttered benches
accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep bystanders, children, and visitors away
while operating a power tool. Distractions can
cause you to lose control.
Model
Standard bolt
High tensile bolt
Square drive
High
Low
High
Low
High
Low
Overall length
Net weight
BH2420
30 min.
and dark areas
DC24SA
A.C. only 50 Hz - 60 Hz
D.C. 7.2 V - 24 V
BH2433
60 min.
USA003-2
Electrical Safety
4. A battery operated tool with integral batteries
or a separate battery pack must be recharged
only with the specified charger for the battery.
A charger that may be suitable for one type of
battery may create a risk of fire when used with
another battery.
5. Use
specifically designated battery pack. Use of
any other batteries may create a risk of fire.
Personal Safety
6. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use tool while tired or under the
invite
influence of drugs, alcohol, or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
7. Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be caught
in moving parts.
8. Avoid accidental starting. Be sure switch is in
the locked or off position before inserting
battery pack. Carrying tools with your finger on
2
BTW200
M10 - M16 (3/8" - 5/8")
M10 - M12 (3/8" - 1/2")
12.7 mm (1/2")
0 - 2,000/min.
0 - 1,600/min.
0 - 3,000
0 - 2,500
200 N.m (144 ft.lbs)
150 N.m (108 ft.lbs)
226 mm (8-7/8")
2.9 kg (6.4 lbs)
DC24WA
BH2420
24 V
55 min.
battery operated
BH2433
90 min.
tool only with