Advertisement
GXSeries
DANGER
Welcome.
GX Series Smart Charger. Read and understand the
User Guide before operating the charger. For questions
regarding our chargers, view our comprehensive support
information at www.no.co/support. To contact NOCO for
personalized support (not available in all areas), visit
www.no.co/connect.
What's In The Box.
• GX Series Smart Charger
• AC Cable
• User Guide
• Information Guide and Warranty
User Guide
PRIOR TO USE, READ AND UNDERSTAND
PRODUCT SAFETY INFORMATION.
Failure to follow the instructions may result
in ELECTRICAL SHOCK, EXPLOSION,
or FIRE, which may result in SERIOUS
INJURY, DEATH, DAMAGE TO DEVICE or
PROPERTY. Do not discard this information.
Thank you for buying a NOCO Genius
®
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Genius GX2440
Summary of Contents for Genius GX2440
-
Page 1: User Guide
FIRE, which may result in SERIOUS INJURY, DEATH, DAMAGE TO DEVICE or PROPERTY. Do not discard this information. Welcome. Thank you for buying a NOCO Genius ® GX Series Smart Charger. Read and understand the User Guide before operating the charger. For questions regarding our chargers, view our comprehensive support information at www.no.co/support. -
Page 2: Getting Started
Glenwillow, OH 44139 United States of America In Standby mode, the charger is not About GX Series Chargers. The NOCO Genius ® charging or providing any power to the battery. Energy Save is activated Series of chargers represents some of the most innovative... - Page 3 IS FOR LEAD-ACID ADVANCED AGM BATTERIES blue LED will illuminate. ONLY. THIS MODE USES A HIGH CHARGING VOLTAGE AND MAY CAUSE SOME WATER LOSS IN WET GX2440 31.2V ± 0.3V | 40A ± 1A (FLOODED) CELL BATTERIES OR OVERCHARGE IN GX3626 46.8V +/- 0.4V | 26A ±...
-
Page 4: Cable Connections
take up to four (4) hours to complete the recovery process AC Input Connection Port and will return to Standby when completed. CAUTION. USE THIS MODE WITH CARE. THIS MODE IS FOR LEAD-ACID BATTERIES ONLY. THIS MODE USES A HIGH CHARGING VOLTAGE AND MAY CAUSE SOME WATER LOSS IN WET (FLOODED) CELL BATTERIES. -
Page 5: Mode Button
Connecting to the Battery. and the Charge LEDs will illuminate (depending on the health of the battery) indicating the charging process Do not connect the AC power plug until all other connections has started. are made. Identify the correct polarity of the battery terminals on the battery. -
Page 6: Understanding Advanced Diagnostics
Understanding Charge LEDs. Understanding Advanced Diagnostics. The charger has four (4) Charge LEDs per bank - 25%, Advanced Diagnostics is used when displaying Error 50%, 75% and 100%. These Charge LEDs indicate the Conditions. It will display a series of blink sequences connected battery(s) state-of-charge (SOC). - Page 7 Optimization Memory Returns to last selected mode when Stabilizes internal battery chemistry for restarted increased performance and longevity Interactive Maintenance Plus Alters the charging process based on Keeps the battery fully charged without organic battery feedback overcharging allowing the charger to be safely connected indefinitely Recovery Applies a high-voltage pulse charge when...
-
Page 8: Charging Steps
Charging Steps. Step 9: Maintenance Continuously monitors the battery to determine when a maintenance charge should be initiated. If the battery voltage falls below its target threshold, the charger will restart the Maintenance cycle until voltage reaches its optimal state and then discontinues the charge cycle. The cycle between Optimization and Maintenance is repeated indefinitely to keep the battery at full charge. - Page 9 1.800.456.6626 support@no.co 30339 Diamond Parkway, #102 Glenwillow, OH 44139 United States of America no.co GXS021716A...
Need help?
Do you have a question about the GX2440 and is the answer not in the manual?
Questions and answers