Optional Paper Tray; Memory Board; So-Dimm Types - Brother MFC-L8650CDW Advanced User's Manual

Optional paper tray

An optional lower tray can be installed on the
MFC-L8650CDW and DCP-L8400CDN, and
it can hold up to 500 sheets of 80 g/m
When an optional tray is installed, the
machine can hold up to 800 sheets of plain
paper.
For setup, see the instructions that we have
supplied with the lower tray unit.
WARNING
If you use a Lower Tray, DO NOT carry the
machine with the Lower Tray. You may
injure yourself or cause damage to the
machine because the Lower Tray is not
securely attached to the machine.
62

Memory board

B
Your machine has 256 MB of standard
memory and one slot for optional memory
expansion. You can increase the memory up
2
paper.
to maximum of 512 MB by installing one
SO-DIMM (Small Outline Dual In-line
Memory Module).

SO-DIMM Types

You can install the following SO-DIMMs:
 256 MB Kingston KTH-LJ2015/256
 256 MB Transcend TS256MHP423A
NOTE
• For more information, visit the Kingston
Technology's website at
http://www.kingston.com/.
• For more information, visit the Transcend
website at http://www.transcend.com.tw/.
In general, the SO-DIMM must have the
following specifications:
Type
CAS latency
Clock
frequency
Capacity
Height
DRAM type
NOTE
• There might be some SO-DIMMs that will
not work with the machine.
• For more information, call the dealer you
bought the machine from or Brother
customer service.
144-pin and 16-bit output
4
267 MHz (533 Mb/S/Pin) or
more
256 MB
30.0 mm
DDR2 SDRAM
B
B