Download  Print this page

Changing The Prefix Number; Setting The Fax Logic (sending And Receiving Sequence) - Brother MFC-L8650CDW Advanced User's Manual

Hide thumbs

Advertisement

Chapter 1

Changing the prefix number

a
Press
.
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Initial Setup.
d
Press Initial Setup.
e
Swipe up or down, or press a or b to
display Dial Prefix.
f
Press Dial Prefix.
g
Press On (or Off).
You can turn off the prefix number by
pressing Off. The prefix number will
remain off until you press On.
h
Press Dial Prefix.
i
Do one of the following using the
Touchscreen's keyboard.
To change the prefix number, press
d or c to position the cursor under the
digit to be deleted and press the
Back Space button
the correct digit.
Repeat until the prefix number is
correct, and then press OK.
To exit without making a change,
press OK.
NOTE
• You can use the numbers and symbols 0
to 9, #, and l. (You cannot use ! with any
other numbers or symbols.)
• If your telephone system requires a time
break recall (hookflash), press ! on the
Touchscreen.
• If pulse dialing mode is on, # and l are not
available to use.
j
Press
.
6
Setting the Fax Logic
1
(sending and receiving
sequence)
You can change the process of manual fax
send or receive. If you often send or receive
a fax manually to/from the other party at the
end of a conversation, set the Fax Mode to
Easy Mode.
If you set to Easy Mode: You can send or
receive a fax manually just simply press Fax
Start. Make sure the other party's machine is
ready to send or receive a fax. If you are a caller,
press Fax Start to send a fax. If you are a
receiver, press Fax Start to receive a fax.
If you set to Advanced Mode: No matter you
are a caller or receiver, you can choose you will
send or receive a fax manually. When you press
Fax Start, the machine will ask you to
choose Send or Receive. If you want to send
a fax, press Send to send a fax. If you want to
receive a fax, press Receive to receive a fax.
NOTE
. Then press
a
b
c
d
e
f
g
h
i
Even if you set either Easy Mode or
Advanced Mode and if there is a
document in the ADF, the document in the
ADF will be sent by pressing Fax Start.
Press
.
Press All Settings.
Swipe up or down, or press a or b to
display Fax.
Press Fax.
Swipe up or down, or press a or b to
display Miscellaneous.
Press Miscellaneous.
Press Fax Mode.
Press Easy Mode or Advanced Mode.
Press
.
1

Advertisement

Table of Contents

   Related Manuals for Brother MFC-L8650CDW

This manual is also suitable for:

Dcp-l8400cdn

Comments to this Manuals

Symbols: 0
Latest comments: