During an active call there are several functions available by
touching a corresponding onscreen button.
Hold: Place the current active call on hold.
Add call: Displays the dialer so you can call another
Keypad: Displays the onscreen keypad, where you can
enter number using DTMF (Dual Tone Multi Frequency).
End call: Terminates the call.
Speaker: Routes the phone's audio through either the
speaker or through the earpiece.
Touch Speaker to route the audio through the speaker.
(You can adjust the speaker volume using the volume
keys.) A green line will appear under the Speaker button.
Touch Speaker again to use the phone's earpiece (see
"Using the Speakerphone During an Active Call" on
page 45). The green line will disappear when Speaker is
Mute/Unmute: Turn the onboard microphone either on
Touch Mute during a call to mute the microphone. A
green line will appear under the Mute button.
Touch Mute again to unmute the microphone. The green
line will disappear when Mute is not activated.
Headset: Connects to a Bluetooth headset.
Touch Headset during a call to activate a Bluetooth
headset. A green line will appear under the Headset
Touch Headset again to deactivate the Bluetooth
headset. The green line will disappear when the Headset
is not activated.
for more options:
Contacts: Allows you to go to your Contact list.
Memo: Allows you to write a memo.
Message: Allows you to write a message during a call.