LifeSpan STRIDE Owner's Manual page 16

4.12. User Defined Program
There are three user programs U01, U02, U03.
1. Setting
Press the program key to select one of the user programs U01-U03 for self-setting program. Then
press MODE key to start customization The speed and incline window show the value of the segment.
Use the SPEED +/ SPEED – or INCLINE +/INCLINE – buttons to adjust the speed and incline values
for the segment. Press the MODE button to confirm and move on to the next segment.
There are 10 equal segments per program. Each segment contains the unique speed and incline
values inputted by the user.
All user program data is stored until overwritten. This data will not be lost if power is disconnected.
2. Start
A: Under standby mode, press "PROG" continuously until you reach the user defined programs (U01-
U03). After setting the desired workout time, press "START" to start the program.
16
STRIDE