Advertisement
4
Select the position of defrost (Fig. 6).
At this setting, your frozen milk/baby food can be defrosted till liquid
state. Depending on the milk volume it can take up to 2 hours to defrost
your milk/baby food. When your milk/baby food is defrosted, choose the
keep warm setting or express warming setting to warm your milk/baby
food. Consider the start temperature of your milk around fridge
temperature for the warming timings as rough guideline.
Note: Due to the high variety of baby food consistencies, it is strongly
recommended to continuously stir and check while you are defrosting the
baby food for an optimal result.
5
Turn the knob back to the 'off' position when the bottle/container
is removed from the bottle warmer. (Fig. 7)
Using the bottle warmer with keep warm setting
1
Put the mains plug in the wall socket (Fig. 3).
2
Place the bottle or container in the bottle warmer (Fig. 4).
3
Fill the bottle warmer with drinking water up to the level of the
milk/baby food in the bottle/container. In case of large amounts of
milk, the maximum level of water is approximately 1 cm below the
top of the bottle warmer. (Fig. 5)
4
Select the position of keep warm (Fig. 6).
At this setting, you can warm your milk/baby food at a slow pace and
keep it warm at the right end temperature. Depending on the milk/baby
food volumes and the baby food consistencies, the warming time will take
longer/shorter.
Note: Philips Avent recommends to feed your baby as soon as possible after
the milk/baby food is warmed. We advise not to reheat the milk/baby food
after it has cooled down again.
Note: Always check the temperature before you feed your baby.
5
Turn the knob back to the 'off' position when the bottle/container
is removed from the bottle warmer. (Fig. 7)
ENGLISH
9
Advertisement
