Olympus Digital Vision D-220L Instructions Manual page 58

Press together.
Appuyer ensemble
Presione.
conjuntamente.
Press to cancel.
Appuyer pour
annuler.
Presione para
cancelar.
58
OK
NO YES
OK
Press OK to
format.
Appuyer sur OK
pour formater.
Presione OK para
formatar.
E
To format the card:
1
Pressing the Erase mode button and the Flash mode
button at the same time sets the screen to the YES/NO
display.
2
Press the OK button to start formatting (the Card error
indicator blinks). Press the Erase mode button to cancel
the mode.
3
When the card formatting is done, the Card error indicator
goes off.
To re-format the card intentionally:
Press the Erase mode button and the LCD monitor ON/OFF
button simultaneously, with the power OFF, to set to the
YES/NO display. Press the OK button.
Note:
Formatting the card erases the existing data,
including pictures which have been write-
protected from the camera. Be careful not to
erase important data when formatting a recorded
card.
Formatting is not engaged when the write-protect
adhesive seal is placed on the card.
Non-Olympus brand cards or cards formatted
from a PC must be formatted by the camera.
These cards may take longer to record than
recommended Olympus brand cards.