Displaying Pictures On The Lcd Monitor; Turning On The Lcd Monitor - Olympus Digital Vision D-220L Instructions Manual

Olympus digital camera instructions
Table of Contents

Advertisement

110
'98 03 21
10:35
3
3
DISPLAYING PICTURES ON
E
THE LCD MONITOR

TURNING ON THE LCD MONITOR

After taking a picture, you can immediately view it
on the LCD monitor.
Close the lens barrier and press the LCD monitor ON/OFF
button to turn on the LCD monitor.
When the monitor is turned on, the camera automatically
checks the card. If there is no card in the camera, the Card
error indicator blinks on the control panel. If the card is in
another format and is unreadable, the camera enters the
Card format mode. (p. 58)
The last picture taken is displayed on the LCD monitor.
The frame number and the battery check indicator are also
displayed, as well as the Date, Resolution, and Protect
indicators if they are set. When there are no pictures
stored in the card, a blank blue screen is displayed.
Resolution, Battery Remaining and Date indicators will
disappear after about three seconds. If the batteries are
low, the low-battery indicator appears and blinks.

Advertisement

Table of Contents
loading

Table of Contents